Roger Mayer Mission Control Set, Skyscraper, RX1, SX4 und TX4 - B-WARE -

• SYSTEM INFORMATION: The system consists of an FM transmitter and receiver using rolling code encrypted digital signal packets. The frequency bands that are used require no license to operate and the overall performance of the system is secure and free from hacking or interference. The range is over 35m in all conditions and exceeds this in open air and most auditoriums. The RX-1 receiver can learn the unique code of up to 7 transmitters thus making guitar changing easy. The transmitter also transmits a signal when it's time to change the battery but battery life is over 9 months with normal use. We have chosen to use the best and most secure radio system available rather than cheaper AM or Bluetooth for this critical application. The audio switching is direct using reed relays with special low level signal contacts in a vacuum and therefore cannot be improved by any other method. The overall system parameters represent the state of the art and certainly the Mission Controller is the first Radio FX Switching System of it's kind in the World for musicians.
• TRANSMITTERS: You have the choice of having control from a Floor Controller, Guitar Strap or directly from your Guitar. All the transmitters have a battery life of over 9 months and also transmit a low battery alert signal to the receiver and decoder.
• SKYSCRAPER GUITAR STRAP TRANSMITTER: This controls 2 insert or effects loops with a push on - push off command. The commands are decoded by the RX-1 receiver or SX-4 and control the reed relay audio switching to insert or bypass the loop or effect. The switching action can also be easily configured to act as a remote footswitch: e.g. amplifier channel switching.
• TX-4 FLOOR CONTROLLER TRANSMITTER: This controls a further 4 insert or effects loops using a push on - push off command. You can use up to 6 TX-4 units for multiple area access or to expand the total number of channels up to 26. A black plastic strip is provided to write on.
• RX-1 RECEIVER: This is housed in our standard sized enclosure and has been configured to receive the commands from all of the transmitters used. It also provides switching functions for 2 insert or effects loops. Provision for storing the antenna when travelling is provided plus led indication of the status each of the channels. A low transmitter battery alert led is also provided and recessed switch and a led for the learn function complete the front panel features. It can be powered by a 9V battery or from an AC Adapter (not provided). The data stream that is received can be further connected to the SX-4 switching decoder modules via a normal guitar patch cable.
• SX-4 SWITCHING DECODER: This is housed in our standard sized enclosure and controls 4 more switching functions of insert or effects loops. It is connected to the master RX-1 receiver via the data bus. The SX-4 can be learnt to recognise one or more unique transmitter code signatures. It can be powered by a 9V battery or from an AC Adapter (not provided). The signal path is further optimised by using jack sockets that are normally connected to the next insert in line thus reducing the amount of cables required when using effects connected to form a train.
• OTHER APPLICATIONS:
  • RECORDING STUDIO WORK: Remote control of effects or equipment through the glass or in a sound booth.
    • TRIGGERING AN EXTERNAL DEVICE: The system can be used to control any device during a performance. Light, smoke special FX etc.

Es sind noch keine Bewertungen zu diesem Produkt vorhanden. Sie können jetzt eine Bewertung zu diesem Produkt schreiben.